The FNIRSI WD-02 wall scanner and metal detector allows you to analyze the contents behind your walls. Three detection modes: With metal detection, cable detection and wood file detection modes, you can easily switch the detection mode according to different working conditions. With up to 120mm detection depth, this wall scanner can detect deeper than conventional drilling depth (30-60mm), making it perfect for a variety of drilling scenarios. The sensitivity can be adjusted in real time according to your needs, with a lower sensitivity for higher accuracy.
This wall scanner features a high-resolution color display for clear and intuitive readings, even in low-light conditions. With multiple detection status prompts and alerts such as screen status display, indicator light status display, and audible beep reminder, you can be sure to drill safely and accurately.
With a center-positioning hole design, this wall scanner allows you to mark the punching position immediately after detection, helping you easily achieve precise drilling. This wall scanner is perfect for indoor or outdoor use for both industrial and home applications.
Maximum detection depth: With up to 120mm for ferrous metals, 100mm for non-ferrous metals (such as copper), 50mm for AC and 40mm for single-strand copper wire (≥4mm²), as well as 38mm (depth mode) or 20mm (precision mode) for foreign material detection, this wall scanner can detect a variety of objects under different conditions.
Recyclable Lithium Battery: The built-in rechargeable lithium battery can be charged with the included Type-C charging cable, reducing the need for additional battery configurations.
Features
- Don't worry about punching holes, three detection modes: metal detection, cable detection, wood file detection, switch the detection mode arbitrarily according to different working conditions
- Depth detection: up to 120 mm can be detected, covering the conventional drilling depth (30~60 mm) and different drilling scenarios are not a problem
- Make punching more convenient: the sensitivity can be adjusted in real time as needed, the lower the sensitivity, the higher the accuracy (adjust according to the use environment)
- High-resolution color screen at a glance: highlights can be seen clearly, the dark night is not dazzling, and the color display is more intuitive
- Multiple warnings, safe drilling: screen status display, indicator light status, signal sound reminder, multiple detection status messages, only when you have a bottom in mind can you get started safely
- Hole position marking, precise drilling with one stop: center positioning hole design, directly mark the punching position after detection, to achieve precise drilling with one stop
- Rechargeable lithium battery: Built-in rechargeable lithium battery, no need to buy extra battery configuration Type-C charging hole, charge and use
- Wide application: easy to handle multiple scenarios, whether it is indoor or outdoor or industrial and household, it can be easily handled
Specifications:
- Model: WD-2
- Usage time: 2 hours
- Power supply mode: rechargeable lithium battery; Type-C charging
- Battery: 3.7V 300mAH
- Automatic shutdown time: 5 minutes after no operation
- Maximum detection depth:
Ferrous metals: 120 mm
Non-ferrous metal (copper): 100 mm
AC: 50 mm
Single-strand copper wire (≥4mm²): 40mm
Foreign material (usually refers to the wood file): 38 mm (depth mode), 20 mm (precision mode)
- Note: The detection result is affected by the material and size of the detected object, as well as the material and size of the detected surface.
State and other factors; if the cable is not charged, the detection depth will be reduced.
- Temperature range:
Working humidity: 0~85% RH (in metal mode), 0~60% RH (in foreign object mode), 0~30% RH (in AC mode)
- Working temperature: -10~50°C
- Storage temperature: -20~70°C
- Dimensions: 138x68x22 mm
- Weight: 274g
